FVCA01.1-4K00-3P4-MDA-LP-P002-01V01S0002 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912006972
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
1 Seconds
The Bosch Rexroth Indramat FVCA01.1-4K00-3P4-MDA-LP-P002-01V01S0002 is a frequency converter from the FVCA Frequency Converters series with an output power of 4.0 kW and a nominal voltage of 400 V. It has a rated input current of 16.0 A, supports three-phase supply, and features an LCD display with ModBus communication. The unit includes an integrated internal brake chopper, operates at a default PWM frequency of 8.0 kHz, and offers a digital resolution of 0.01 Hz.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FVCA01.1-4K00-3P4-MDA-LP-P002-01V01S0002 is a frequency converter built by Bosch Rexroth Indramat for the FVCA Frequency Converters series. It accepts three-phase mains power and produces a variable output waveform so induction or permanent-magnet motors can operate at controlled speeds and torques inside automated machines. The unit belongs to design revision 1 of the 01 series line and is supplied with an integrated brake chopper to dissipate regenerated energy. An external braking resistor can be added for sustained deceleration cycles.
Its power section is rated for a continuous motor output of 4.0 kW, corresponding to a steady-state output current of 10.0 A. The converter operates on a three-phase AC supply of 380–480 V with a tolerance of -15% to +10%, allowing operation on common factory feeders. Pulse-width modulation uses a default carrier frequency of 8.0 kHz, which reduces audible noise while keeping switching losses within design limits. Speed commands have a resolution of 0.01 Hz, supporting accurate closed-loop vector control across the 1000:1 field-oriented control speed range and enabling 200% rated torque at zero frequency during startup. A built-in LCD and front-panel potentiometer provide local adjustment. Modbus networking forwards setpoints from higher-level controllers.
The enclosure has a protection rating of IP20, so it must be mounted inside a panel while maintaining adequate top-side airflow. Its housing measures 330 mm high, 150 mm wide, and 157 mm deep, making it suitable for compact cabinet installations. Apparent input demand peaks at 6.5 kVA, and the industrial Class C3 filter keeps conducted emissions within applicable limits. The converter supports continuous operation at altitudes up to 1,000 m and withstands vibration acceleration up to 5.9 m/s². Wiring terminates on M6 screws, providing secure connections for the power conductors. The frame-size B casting keeps the mass to 4.8 kg, allowing the unit to be removed for service without additional lifting equipment.
