FVCA01.1-30K0-3P4-MDA-LP-NNNN-01V01 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912002618
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat FVCA01.1-30K0-3P4-MDA-LP-NNNN-01V01 frequency converter is part of the FVCA Frequency Converters series and delivers an output power of 30.0 kW with an apparent power of 40.0 kVA. It supports a supply voltage range of 3-phase 380 to 480 V, has a rated input current of 73.0 A, and utilizes a ModBus communication interface. The unit features an LCD display, PID controller, and a protection rating of IP20.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FVCA01.1-30K0-3P4-MDA-LP-NNNN-01V01 frequency converter is produced by Bosch Rexroth Indramat within the FVCA Frequency Converters series. It uses frame size E and is intended for decentralized drive systems where cabinet space is limited. By converting a fixed three-phase supply into a variable AC output, the unit supports closed-loop speed and torque control for standard motors used in conveyors, pumps, and processing equipment. Its type code indicates design revision 1 and series line 01.
At its continuous rating, the converter delivers 30.0 kW of motor power and operates from a nominal input of 400 V within a permitted range of 380 to 480 V. The associated input demand is 73.0 A, and the unit also supplies up to 60 A to the motor. The enclosure measures 525 mm × 250 mm × 251.5 mm, and the apparent power reaches 40.0 kVA. Internally, the control section uses PID regulation and switches the IGBTs at a default carrier frequency of 3.0 kHz with space-vector PWM. Output frequency can be adjusted in digital steps of 0.01 Hz, allowing precise speed setting through the front-panel potentiometer or Modbus commands. An LCD panel displays setpoints and diagnostic codes, and the built-in brake chopper terminal supports an external resistor for controlled deceleration.
For transient events, the drive can supply 200% of rated current for 1 second and develops 200% starting torque at 0 Hz. Electromagnetic noise is limited by a Class C3 filter, and the converter accepts line frequencies of 50/60 Hz at installation heights up to 1,000 m. The enclosure is rated IP20, so the unit must be installed inside protected switchgear. The converter has a mass of 22.0 kg, which is useful for mounting and handling during installation. A pulse generator range of 1:1000 supports encoder referencing during speed control.
