FVCA01.1-2K20-3P4-MDA-LP-NNNN-01V01 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912002610
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
33 Seconds
The Bosch Rexroth Indramat FVCA01.1-2K20-3P4-MDA-LP-NNNN-01V01 is a frequency converter in the FVCA Frequency Converters series. It features an output power of 2.2 kW, nominal voltage of 400 V, and supports three-phase operation within a voltage range of 380 to 480 V. The converter comes with an integrated brake chopper, PID controller, and ModBus communication interface.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FVCA01.1-2K20-3P4-MDA-LP-NNNN-01V01 frequency converter is produced by Bosch Rexroth Indramat within the FVCA Frequency Converters series. It conditions three-phase mains power so that voltage and frequency are adjustable, letting automated lines vary the speed of induction or permanent-magnet motors without mechanical gear changes. Local setpoints can be adjusted with the built-in potentiometer, and remote control is available through a Modbus interface, allowing the drive to integrate directly with PLC supervision for material handling, pumping, and general motion tasks.
Electrically, the unit processes an apparent power of 3.6 kVA and delivers a continuous output of 2.2 kW while supplying up to 5.5 A per phase. Its inverter switches at a default carrier frequency of 8.0 kHz using space-vector PWM, which helps keep motor current sinusoidal and operating noise low. The supply is three-phase 400 V at 50/60 Hz, and class C3 filtering supports installation in industrial EMC zones. An integrated brake chopper directs excess DC-bus energy to an external resistor during rapid deceleration. The unit is housed in frame size A and has an ingress protection rating of IP 20 for cabinet-mounted service.
Under field-oriented control, the converter can produce a starting torque of 200 % at 0 Hz, and its overload routine allows 200 % In for 1 s to absorb momentary load surges. The permissible mains range is 3 AC 380...480 V (-15 % / +10 %), covering common plant supplies without hardware changes. Digital commands are resolved in 0.01 Hz increments, and the onboard PID controller maintains set accuracy at 0.01%. An LCD panel reports status and parameters. Panel integration is also supported by dimensions of 275 × 125 × 122 mm and a net mass of 2.8 kg.
