Product Description:

The FVCA01.1-15K0-3P4-MDA-LP-P002-01V01 frequency converter is produced by Bosch Rexroth Indramat as part of the FVCA Frequency Converters series. In automated plants, it serves as a variable-speed drive that converts fixed mains power into controlled three-phase output so pumps, fans, and conveyors can match process demands without mechanical gearbox changes. Its integrated control, braking, and communication features allow the unit to be installed directly inside electrical panels for coordinated motion and energy management.

The inverter provides up to 15.0 kW of motor power, draws an apparent power of 21.0 kVA, and operates from a nominal line of 400 V. At that voltage, it delivers a continuous output current of 33.0 A and supports speed control from 0.00 to 400.00 Hz, allowing both very low motor speed and oversynchronous operation. The cabinet-mount frame in size C measures 398 mm high, 175 mm wide, and 199 mm deep, and it weighs 9.0 kg. An internal brake chopper works with an external resistor to dissipate regenerated energy during deceleration. The standard control hardware includes Modbus networking, an LCD, a Class C3 EMC filter, and local speed control through a potentiometer. Design revision 1 electronics operate from -10 to 40 °C at elevations up to 1000 m and draw 46 A from a three-phase 50 to 60 Hz supply.

The carrier is fixed by default at 6.0 kHz, and the electronics are protected by an IP20 enclosure for use inside ventilated cabinets. Short-term overload capability reaches 150% In for 60 s and 180% In for 10 s, giving additional torque during acceleration or shock loading without immediate derating. Compatibility with mains in the range of 3 AC 380 to 480 V (-15% / +10%) supports installation on common industrial power systems. Because the enclosure is intended for cabinet installation, the converter is suited to protected panel environments rather than open mounting on the machine.