Product Description:

The FVCA01.1-11K0-3P4-MDA-LP-P001-01V01 is a frequency converter produced by Bosch Rexroth Indramat within the FVCA Frequency Converters series. Designed for three-phase motors in automated plants, this unit converts fixed mains power into a variable output that regulates speed, torque, and direction for conveyors, pumps, and processing machines. By adjusting output frequency and voltage, it helps the motor match changing process demand instead of running at a constant speed. The unit is part of series line 01 and design revision 1. It is intended for use in new or retrofit cabinets where controlled motor operation is required.

Incoming power is accepted at the 400 V nominal level. The drive delivers 11.0 kW while drawing 36.0 A and supplying the motor with 24.0 A. For breakaway loads, it can produce torque up to 200% at 0 Hz when using selectable U/f, SVC, or FOC control algorithms. These modes operate through space-vector PWM at a 6.0 kHz carrier, and motor frequency can be set in 0.01 Hz increments through the keypad, Modbus link, or front-mounted potentiometer. This control flexibility supports both simple variable-speed duties and applications that need stronger low-speed response. An integrated brake chopper protects the DC bus during regenerative events, and the Class C3 line filter keeps conducted emissions within industrial limits.

The converter has an apparent power capacity of 15.0 kVA and uses frame size C with dimensions of 175 mm wide, 398 mm high, and 199 mm deep. A mass of 8.8 kg supports panel mounting, while the IP 20 enclosure is suited for indoor cabinet installation. Status is shown on an LCD with LED indicators for operating conditions and faults, which allows clear local monitoring during operation. Power enters on three phases within the 3 AC 380…480 V (-15 %/+10 %) range, which matches common industrial distribution systems. The housing size also supports organized placement in control panels with standard wiring access.