Product Description:

The FVCA01.1-0K75-3P4-MDA-LP-NNNN-01V01 is a cabinet-mounted frequency converter manufactured by Bosch Rexroth Indramat within the FVCA Frequency Converters series. As a drive component, it converts fixed-frequency three-phase mains power into a variable-frequency, variable-voltage output for speed and torque control in conveyors, pumps, and general-purpose machinery. This model is assigned design revision 1 and release number 01, and it includes onboard control hardware with a potentiometer and an LCD display for local parameter adjustment. It is intended for cabinet installation where compact variable-speed control is needed without a separate operator panel.

It handles an apparent power of 1.6 kVA. From a nominal supply of 400 V, the converter accepts a three-phase input in the 380 to 480 V AC range, draws 3.7 A at rated load, and produces a motor current of 2.5 A. That current supports a motor output of 0.75 kW, while the internal brake chopper absorbs regenerated energy during deceleration. The drive uses space-vector PWM with a default switching frequency of 8.0 kHz and supports V/f, sensor vector, and field-oriented control modes. Digital frequency commands are resolved to 0.01 Hz, and the output frequency can be programmed up to 400 Hz. Communication with higher-level PLCs is available through the Modbus interface, and the integrated filter is classified for industrial C3 environments to limit conducted emissions.

The housing uses frame size A and measures 125 mm in width, 122 mm in depth, and 275 mm in height, while overall mass is 2.7 kg. Installation inside standard cabinets is supported by an IP 20 protection rating, and operation is permitted up to 1000 m above sea level. The LCD keypad, onboard potentiometer, and Modbus connection provide direct local adjustment and remote communication without additional control accessories. Its cabinet-mounted format keeps power and control functions in a single enclosure suited to standard panel layouts.