FECP02.1-5K50-3P400-A-SP-MODB-01V01 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912001297
Ask for AvailabilityThe Bosch Rexroth Indramat FECP02.1-5K50-3P400-A-SP-MODB-01V01 is a frequency converter from the FEC Frequency Converters series. It has a rated power of 5.5 kW, supports a voltage range of 3 AC 380 to 480 V, and offers V/F control mode with ModBus interface. This second generation model supports three-phase input, delivers a continuous rated current of 13 A, and offers high durability in a compact, IP20 protected design.
Internal Product Review
The FECP02.1-5K50-3P400-A-SP-MODB-01V01 is a frequency converter engineered for pump and fan applications. Magnetic Flux PWM and a 1:100 speed regulation range support smooth motor control and stable adjustment across varying process demands. A ModBus interface and 150% start-up torque at 5 Hz make this unit an especially capable choice for responsive drive performance.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FECP02.1-5K50-3P400-A-SP-MODB-01V01 belongs to the FEC Frequency Converters series produced by Bosch Rexroth Indramat. As a second-generation, design 1 frequency converter, it is intended to regulate motor speed for pumps and fans in industrial automation. By adjusting the output frequency and voltage, the unit allows the driven machine to match flow or air volume to real-time demand, which helps reduce energy use and mechanical stress. It is well suited to variable-torque applications that spend much of their operating time below full load.
Electrical ratings cover the voltage and current range expected in common machine rooms. The converter accepts a three-phase supply in the 3 AC 380–480 V range and is intended for 400 VAC installations. Under nominal line conditions, it draws 17 A and delivers up to 5.5 kW of shaft power, which corresponds to 9.9 kVA of apparent power. Magnetic Flux PWM and V/F control help maintain motor magnetization, while the digital frequency setpoint can be adjusted in 0.01 Hz steps through the front-panel potentiometer or the Modbus interface. An internal brake chopper works with an external resistor to dissipate regenerative energy, and the drive withstands 120% for 60 seconds of overload. The hardware weighs 3.5 kg, fits mechanical size 2 frames, occupies a panel width of 220 mm, and remains functional up to 1000 m altitude.
In service, the converter supplies 13 A continuously and can tolerate 105% for 60 minutes without derating, which suits variable-torque loads that may run near nominal output for extended periods. Its speed regulation range of 1:100 allows slow circulation during standby while still supporting rated flow, and starting performance includes 150% at 5 Hz torque capability for heavier breakaway demands. The IP20 enclosure is intended for cabinet installation and helps protect against accidental contact with internal live parts. The declared high-durability characteristic indicates a design intended for extended service intervals in routine industrial use.
