Product Description:

The FECP01.2-15K0-3P400-A-BN-NNNN-01V01 is a pump- and fan-oriented frequency converter from Bosch Rexroth Indramat’s FEC Frequency Converters series. Serving as an interface between a three-phase supply and an induction motor, the unit governs motor frequency to deliver variable flow and pressure in automated plant services. This operating profile suits ventilation systems, water circulation equipment, and other installations where smooth speed control is preferred over fixed-speed operation. The drive is supplied in mechanical size 3 with a large control-panel footprint, making it suitable for standard switchgear cabinets that require clear front access for wiring and operating adjustments.

Electrical input is accepted over a 3 AC 380 to 480 V grid, and the converter is designated for 3-phase mains. The power section is rated at 15 kW, giving the unit the capacity needed for mid-range centrifugal machines used in plant utilities. An internal brake chopper is integrated, so regenerative energy can be managed during rapid deceleration without adding separate external hardware. The enclosure carries an IP20 protection class, which means the unit should be installed inside a protected cabinet. For transient load spikes, the control algorithm allows an overload of 120% for 60 seconds, helping the motor accelerate inertial impellers without nuisance trips during short demand increases.

The drive also permits a continuous reserve of 105% for 60 minutes, which helps air-moving and pumping equipment continue operating through routine increases in filter resistance or back-pressure. A housing width of 275 mm keeps the module compact enough for multi-drive cabinet layouts while still leaving room for its internal cooling path. The controller is Design 2, and this version does not use a front-panel potentiometer. Setup is handled through a keypad or network connection, which supports more consistent digital adjustment in plant environments.