Product Description:

Bosch Rexroth Indramat manufactures the FECP01.1-200K-3P400-A-BN-NNNN-01V01 as part of the FEC Frequency Converters series. Classified as a frequency converter, the device belongs to the first generation and is issued in design 1. It is intended to regulate induction-motor speed in pump and fan duties within building automation, water handling, and process lines. By translating fixed mains frequency to a programmable output, the converter lets controllers align flow or airflow with real-time demand, lowering energy draw and wear across connected mechanical equipment. Integration into electrical panels is straightforward because the unit mounts behind standard switchgear and communicates with upstream PLCs through simple control terminals.

The electrical envelope starts with a 3-phase mains input rated for 3 AC 380 to 480 V, internally categorized as 400 VAC. Within this span, the converter sustains the required voltage-to-frequency ratio for smooth motor magnetization. An overload margin of 120% for 60 seconds supports high inrush currents during start-up, while protection rating IP20 denotes finger-safe openings that still require placement inside a closed cabinet. These parameters set the compatibility limits for circuit protection, feeders, and ventilation paths.

The control assembly ships in a Big size panel format, giving extra room for busbars and airflow channels without deviating from standard FEC footprints. Extended duty cycles are covered by a sustained load allowance of 105% for 60 minutes, which is useful for moderate overloads along variable-torque pump curves. The drive is delivered without a potentiometer, so speed references originate solely from remote analog signals or fieldbus commands, minimizing panel clutter. Its rating for high durability supports long service intervals in the humid, particulate environments typical of pump and fan rooms.