Product Description:

The FECP01.1-132K-3P660-A-RN-NNNN-01V01 is a frequency converter manufactured by Bosch Rexroth Indramat and assigned to the FEC Frequency Converters series. It is installed between the incoming power source and an AC motor, where it produces variable voltage and frequency for controlled motor operation. This arrangement lets pump and fan systems adjust speed to match changing demand instead of relying on fixed-speed operation and mechanical restriction. In automated fluid-handling systems, that helps reduce unnecessary energy use while maintaining steady process control during normal operation.

This model delivers a continuous output of 132 kW, making it suitable for large pumps, blowers, and ventilation equipment. It accepts a 3-phase supply, which supports balanced power delivery for high-load industrial service. The enclosure carries an IP20 rating, so the unit is intended for cabinet installation where contact protection is sufficient. Panel layout is supported by a housing width of 570 mm, which is useful when allocating space for power wiring, cooling clearance, and neighboring components. For temporary load increases, the converter can operate at 120% for 60 seconds, and it can also handle 105% for 60 minutes when the overload level is lower but lasts longer.

The unit uses mechanical size 7, placing it in the larger end of the series for high-power duty. Braking energy is handled through an external brake chopper, which keeps that heat-generating function outside the main drive housing. The control section is supplied without a potentiometer, so the speed reference must come from a digital command source or an external analog signal. The converter is design 1 and version 1, and it should be mounted in a properly ventilated control cabinet to maintain stable operation during continuous pump or fan service.