Product Description:

The FECP01.1-132K-3P400-A-BN-NNNN-01V01 is a frequency converter manufactured by Bosch Rexroth Indramat and positioned within the FEC Frequency Converters series. It is intended to regulate pump and fan drives by adjusting induction motor speed to match fluid or airflow demand, which helps reduce energy use in automated plants. As a dedicated AC drive, it converts fixed-frequency mains power into variable-frequency output that governs motor torque across the full speed range. This function supports energy-saving operation and helps reduce wear in large utility skids and ventilation trunks.

It draws power from a 3-phase network in the 3 AC 380 to 480 V range, which matches the 400 VAC class widely used in industrial switchboards. The converter supplies a continuous output of 132 kW, which is suitable for large centrifugal machines. For brief transients, it tolerates 120% for 60 seconds of overload, covering valve slams or sudden duct pressure rises without issuing a fault. An internal control section coordinates soft-start and ramp functions, while the enclosure has an IP20 rating, so the unit requires placement in a protected cabinet where dripping water and conductive dust are not present.

Longer thermal events are addressed by an allowance of 105% for 60 minutes, which lets the converter endure extended high load without derating. The frame uses mechanical size code 7, and its large panel format leaves enough space for cable routing and service access. Regenerated energy during deceleration is dissipated through an external brake chopper, which helps keep internal temperature lower than an integrated resistor would. With a front width of 570 mm, the enclosure layout must allocate a substantial bay, while the first-generation, design-1 platform does not include a potentiometer and remains focused on continuous HVAC duty.