FECG02.1-5K50-3P400-A-SP-MODB-01V01 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912001284
The Bosch Rexroth Indramat FECG02.1-5K50-3P400-A-SP-MODB-01V01 is a frequency converter from the FEC Frequency Converters series and is designed for general automation. This device has a rated power of 5.5 kW, a voltage range of 3-phase 380 to 480 V, and supports V/f control technology. It features an internal brake chopper, high overload capacity, and uses a ModBus interface, with a weight of 3.5 kg and IP20 protection class.
Internal Product Review
The FECG02.1-5K50-3P400-A-SP-MODB-01V01 is a frequency converter for general automation with 3-phase input. V/f control and SVPWM modulation give this unit smooth motor handling and stable drive response. The 150% overload capacity for 60 seconds is a strong technical advantage.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FECG02.1-5K50-3P400-A-SP-MODB-01V01 is a frequency converter produced by Bosch Rexroth Indramat within the FEC Frequency Converters series. It is intended for general automation tasks where variable-speed control of three-phase induction motors is required. By adjusting the output frequency and voltage, the unit lets connected motors match speed to process demand, which can reduce unnecessary energy use during partial-load operation. The built-in ModBus interface supports remote control and monitoring from a compatible controller. This operating method suits equipment that needs stable motor speed in pumps, fans, and conveyor systems. The unit is a second-generation Design 1 version and includes an internal brake chopper to manage regenerated energy during rapid deceleration.
It operates from a three-phase supply in the 380 to 480 V range and belongs to the 400 VAC voltage class. At the input, it draws 17 A, and the inverter delivers 13 A of continuous output current to the motor. Its rated output is 5.5 kW, making it suitable for pumps, fans, and small conveyors. Speed can be adjusted in 0.01 Hz increments, which allows fine low-speed trimming when the V/f control method and SVPWM modulation are used together. The enclosure measures 176 mm × 220 mm × 220 mm, so it fits compact cabinet layouts without taking excessive panel space.
For short-term transients, the inverter can supply 200% for 1 second or 150% for 60 seconds of nominal current to help the motor ride through brief overload conditions. The apparent power rating of 9.9 kVA matches the electrical capacity of the drive section during normal operation. A start-up torque of 150% at 5 Hz helps loaded motors overcome static friction during acceleration without added mechanical reduction. The housing has an IP20 protection class, so the unit is intended for installation inside a closed control panel. Mechanical size 2, the small operator panel, the local potentiometer, and ModBus networking support local control and straightforward integration into automation equipment.
