Product Description:

The FECG01.1-30K0-3P400-A-BN-NNNN-01V01 frequency converter is produced by Bosch Rexroth Indramat and supplied within the FEC Frequency Converters series. It is a standalone AC drive that modulates the supply frequency delivered to induction motors used in material-handling, packaging, and other general automation cells. By scaling output frequency in real time, the device supports speed regulation, coordinated motion, and energy savings in plant equipment. This control method lets connected motors run closer to process demand instead of remaining at fixed line speed, which can reduce unnecessary mechanical stress during partial-load operation.

The drive delivers a continuous output of 30 kW, matching mid-range process pumps and conveyors. It accepts a mains window of 3 AC 380 to 480 V through a 3-phase input bus, so it can be wired directly to common factory power networks without an upstream transformer. The internal electronics are separated from touch points by an IP20 housing intended for mounting in a switch cabinet. For dynamic events such as motor start-up, the inverter withstands 200% for 1 second of its rated current, allowing short bursts of torque without tripping protective circuits. This short-duration overload capacity helps the drive ride through abrupt load changes that occur when conveyors restart under product weight or when rotating equipment must accelerate quickly.

Extended duty is handled by a second overload envelope of 150% for 60 seconds, which is useful when loads increase gradually during mixing or hoisting cycles. With a chassis width of 290 mm, the converter uses size 4 hardware and a large panel form factor, so it fits high-power enclosures while still leaving space for contactors and fusing. DC bus energy is diverted through an external brake chopper, preventing overvoltage during rapid deceleration. Operator adjustment is simplified because the model ships without a potentiometer, relying instead on digital setpoints from the control system. The device belongs to the 1st generation, Design 1 build, and it is categorized in the 400 VAC voltage class.