Product Description:

The FECG01.1-2K20-3P200-A-SP-NNNN-01V01 is a frequency converter produced by Bosch Rexroth Indramat and supplied within the FEC Frequency Converters series. As a configurable drive module, it regulates motor speed in general automation installations where constant or variable torque loads must match process demands. By converting fixed-frequency mains power to a controlled output, the unit provides precise speed adjustment for pumps, fans, and material-handling equipment in factory environments.

This model operates on a 3-phase supply and delivers a rated output of 2.2 kW, giving it enough headroom for small to mid-range induction motors. The protection rating is IP20, so it must be mounted inside a cabinet to guard against contact and falling debris. The converter has an internal brake chopper to dissipate regenerated energy during rapid deceleration, which removes the need for an external resistor assembly in many cases. Width is limited to 125 mm, allowing dense panel layouts, while mechanical size 1 and the small panel form factor help reduce enclosure depth. A built-in potentiometer permits manual setpoint trimming without external controls, and the converter’s high overload profile supports short-term torque surges often seen during machine starts.

Overload handling has two limits. The converter can deliver 200% for 1 second to overcome static friction, and it can sustain 150% for 60 seconds to ride through transient load spikes before thermal derating occurs. These characteristics are associated with the 1st generation platform and Design 1. The small panel size keeps auxiliary wiring short, and internal monitoring works with the potentiometer to maintain smooth ramp profiles during speed changes. This arrangement suits distributed drive sections in conveyor cells, packaging lines, and other production equipment that requires flexible motor control.