Product Description:

The FECG01.1-2K20-1P200-A-SP-NNNN-01V01 is a frequency converter produced by Bosch Rexroth Indramat within the FEC Frequency Converters series. It varies the supply frequency to regulate the speed and torque of induction motors used in material handling, packaging, and similar automation equipment. This allows connected motors to match process demands more closely than fixed-speed operation. The unit is a first-generation model with Design 1, and its compact format suits cabinet-mounted systems that need adjustable motor speed without a large installation footprint.

With a rated output of 2.2 kW, the converter is sized for small to medium motors commonly used on auxiliary axes and general machine drives. It draws power from a single-phase supply, which allows installation where three-phase mains are not available. The enclosure is rated IP20, so the unit is finger-safe and should be installed in a closed cabinet when dust or moisture is present. During transient loads, it can sustain 200% for 1 second and continue at 150% for 60 seconds, which supports rapid acceleration and brief jam-clearing events without unnecessary trips. A built-in potentiometer on the front panel provides a direct manual speed reference, which is useful for local adjustment during setup and basic operation.

An internal brake chopper dissipates regenerated energy during deceleration, reducing the need for external braking resistors on many light-inertia drives. The control electronics use a small-size panel format that fits crowded enclosures while keeping the layout straightforward. A housing width of 125 mm helps the drive fit beside contactors or line filters in standard cabinets and leaves practical room for adjacent components. The converter also has high overload capacity, making it suitable for applications that require short bursts of torque during starts, indexing moves, or temporary load spikes.