FECG01.1-22K0-3P400-A-BN-NNNN-01V01 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912000342
Ask for AvailabilityThe Bosch Rexroth Indramat FECG01.1-22K0-3P400-A-BN-NNNN-01V01 is a frequency converter from the FEC Frequency Converters series with a rated power of 22 kW and a mechanical size of 3. It features a 3-phase input, a voltage range of 380 to 480 V AC, and IP20 protection class. The unit offers high overload capacity, supporting 200 percent for 1 second and 150 percent for 60 seconds, and is designed for general automation applications.
Internal Product Review
The FECG01.1-22K0-3P400-A-BN-NNNN-01V01 is a frequency converter for general automation, rated at 22 kW. Three-phase 400 VAC input supports straightforward integration into common industrial power systems. A 150% overload capacity for 60 seconds gives this unit impressive operating headroom.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The FECG01.1-22K0-3P400-A-BN-NNNN-01V01 is a frequency converter manufactured by Bosch Rexroth Indramat within the FEC Frequency Converters series. It converts fixed three-phase mains power into a variable-frequency output so that motors in general automation systems can run at commanded speeds rather than full line frequency. Typical applications include conveyors, packaging lines, and material-handling stations where energy savings and precise speed control are required. This operating method also helps reduce abrupt starts and allows process speed to follow changing production demand.
The converter accepts a 3-phase supply within a nominal range of 3 AC 380 to 480 V and belongs to the 400 VAC voltage class. Inside this input range, it can deliver a continuous output of 22 kW for motor control duties. Short-term overload is handled by the power stage, which tolerates currents equivalent to 200% for 1 second, allowing heavy loads to accelerate without an immediate trip. The unit relies on an external brake chopper to dissipate regenerated energy during rapid deceleration. Its control board is supplied without a potentiometer, so speed references must come from a higher-level controller or fieldbus.
The enclosure has a cabinet width of 275 mm and an IP20 rating, so it is intended for installation inside a closed control cabinet. Natural convection cooling supports layouts that leave open air paths around the heat-producing sections rather than forcing airflow through the drive. As a 1st generation unit built to Design 1, it follows the early FEC platform arrangement. Continuous operation under elevated torque is supported by an overload capacity of 150% for 60 seconds. The larger panel layout also leaves room for power wiring and separation between control and motor cables inside the enclosure.
