Product Description:

The FECG01.1-1K50-3P200-A-SP-NNNN-01V01 is a frequency converter produced by Bosch Rexroth Indramat for the FEC Frequency Converters series. It translates fixed-frequency three-phase mains into variable motor voltage and frequency, enabling controlled motor speed in conveyors, pumps, feeders, lifts, and simple positioning systems. The unit is design 1 in the first generation of this platform, so it matches the early configuration of the series. Its compact panel format supports dense cabinet layouts and allows it to be installed where available rail space is limited.

It delivers a rated output of 1.5 kW, which suits small and mid-frame induction motors used in light industrial motion tasks. The converter accepts a balanced 3-phase supply, allowing symmetrical current draw across the incoming phases during normal operation. The enclosure has an IP20 rating, so installation is intended for protected electrical enclosures rather than exposed process areas. An internal brake chopper absorbs regenerated energy during rapid deceleration, which helps manage stopping events on loads with rotating inertia. This arrangement reduces the need for external braking hardware in many basic applications. The housing is only 125 mm wide, which helps preserve side clearance for adjacent components and supports compact panel organization.

During short demand peaks, the control section allows an overload of 200% for 1 second and a sustained reserve of 150% for 60 seconds, giving the drive extra current capacity for startup or brief acceleration events. The electronics and power stage are packaged in mechanical size 1, which keeps the unit compact and straightforward to place on mounting hardware. For local adjustment, the front panel is supplied with a potentiometer so motor speed can be trimmed directly from the drive. This manual control is useful during initial setup or whenever an external command source is not active.