Product Description:

The FECG01.1-11K0-3P400-A-BN-NNNN-01V01 is produced by Bosch Rexroth Indramat within the FEC Frequency Converters series. The unit functions as a power-conditioning stage in general automation, taking fixed grid power and delivering a regulated, variable-frequency output that matches the speed and torque demands of connected AC motors. By integrating into standard control cabinets, it enables precise speed regulation and supports applications that need controlled motor operation without relying on mechanical throttling methods.

The converter is rated at 11 kW, so it is intended for continuous service at that output level. It accepts a supply span of 3 AC 380 to 480 V, allowing connection to common low-voltage industrial networks while maintaining suitable insulation clearances. The overload capacity reaches 200% for 1 second during abrupt acceleration and 150% for 60 seconds during longer load peaks. An enclosure rating of IP20 means the unit must be installed inside a protective cabinet, while the housing still allows the airflow needed for convection cooling. The unit also uses mechanical size 2 construction and comes without a potentiometer, so settings are handled through digital parameters rather than a local adjustment knob.

The power side is wired through a 3-phase terminal set that matches plant distribution and feeds an internal brake chopper for controlled energy dissipation during rapid deceleration. The unit belongs to the 400 VAC voltage class, and its design 1 circuitry is used for this version of the converter. Cabinet layout is supported by a large operator panel and a housing width of 220 mm, which helps maintain space for cable bends and airflow around neighboring devices. This layout also fits standard cabinet installation practices used in general automation equipment.