Product Description:

The FECG01.1-0K75-3P200-A-SP-NNNN-01V01 is a frequency converter produced by Bosch Rexroth Indramat within the FEC Frequency Converters series. It is intended for speed regulation and torque control of standard AC motors in general automation environments, serving as an interface between the mains supply and the driven machinery. By varying output frequency, the unit enables energy-efficient acceleration, deceleration, and steady-state operation in conveyors, pumps, and synchronized production lines. The converter also helps maintain smoother motor response during routine process changes, which supports stable operation across varying load conditions.

At the core of its electrical profile is a rated power of 0.75 kW, meaning the converter can continuously supply that output when paired with an appropriately sized motor. It accepts 3-phase line power, so the DC link is charged evenly across all phases and input current harmonics are reduced compared with single-phase units. Two short-term overload ratings support dynamic loads: the drive can deliver up to 200% for 1 second to overcome high breakaway torque and up to 150% for 60 seconds for longer temporary load spikes. An enclosure protection rating of IP20 indicates finger-safe construction suited for mounting inside a ventilated control cabinet.

Its mechanical layout supports tight panel arrangements. The housing width is only 125 mm, and the enclosure is classified as small size, matching the mechanical size 1 designation used throughout the first-generation hardware. This compact format helps the drive fit cabinets where side-by-side spacing is limited. The brake chopper is internal, which eliminates the need for an external resistor switching module when regenerative deceleration is expected. Local speed adjustment is possible because the front fascia is supplied with a potentiometer.