Product Description:

The FECG01.1-0K75-1P200-A-SP-NNNN-01V01 is a frequency converter manufactured by Bosch Rexroth Indramat within the FEC Frequency Converters series. This unit converts fixed-frequency AC from the power supply into a variable output that lets general automation machines adjust motor speed to match process demands. By modulating voltage and frequency, it supports conveyors, small material-handling stations, and auxiliary axes that need compact electronic speed control rather than mechanical gear changes. That operating method also helps the connected motor start smoothly and run at different process speeds without relying on fixed mechanical ratios.

The converter delivers a rated power of 0.75 kW, giving it enough output to run fractional-horsepower induction motors common in light-duty drives. It is supplied from a single-phase input, simplifying installation where three-phase service is unavailable. This arrangement is useful in smaller panels that still require inverter-based motor control. A housing rated IP20 protects against accidental finger contact while remaining suitable for mounting inside a control cabinet with forced ventilation. Energy from regenerative braking is dissipated by an internal brake chopper, so no external resistor module is needed for short decelerations. For fast transient events, the power section can briefly deliver 200% for 1 second, allowing quick starts or short torque surges without triggering a fault.

Longer overloads are handled through a second limit of 150% for 60 seconds, which protects the motor during extended acceleration or moderate jam conditions. Speed trimming can be made directly on the front panel because the device is equipped with a potentiometer. Local adjustment can be useful when a simple manual speed trim is preferred at the drive itself. Its overall width is only 125 mm. The unit has a small size, permitting dense side-by-side placement in multi-axis enclosures. The narrow footprint also leaves more usable panel space for wiring paths and adjacent control components.