Product Description:

The FECG01.1-0K40-3P200-A-SP-NNNN-01V01 is produced by Bosch Rexroth Indramat within the FEC Frequency Converters series. Intended for general automation, the unit varies incoming line frequency so connected motors can match required process speeds and torque demands. Standard drive parameters allow it to support speed-regulated conveyors, pumps, fans, and simple positioning axes without relying on fixed mechanical ratios. Its compact housing and conventional electrical interface help it fit into control panels where wiring access and airflow clearance must be managed carefully. That makes the converter suitable for systems that need adjustable motor speed from a compact inverter rather than a direct-on-line starter.

The converter’s input bridge is rated for three-phase supplies, so balanced line currents reduce harmonic distortion and support stable motor operation. Its control electronics are mounted in a small-size panel format, allowing installation in narrow cabinet sections where available rail space is limited. A housing classified as IP20 helps prevent accidental contact with live parts and limits the entry of solid objects larger than 12 mm, so the unit is intended for enclosed, ventilated control enclosures rather than open mounting. This layout suits protected cabinet installations where direct access to power terminals is restricted during normal use. The converter is Design 1 of the first generation in the FEC platform.

Process transients are handled by the power section’s 200% for 1 second overload margin, which supports rapid acceleration and short peak demands without immediate shutdown. For longer heavy loading, the current reserve increases to 150% for 60 seconds, giving additional capacity for applications such as loaded conveyor starts or short cutting passes. This operating profile is listed as high overload capacity in the technical data. The short reserve helps the drive ride through brief load spikes, while the longer overload window supports repetitive duty above nominal load for limited periods. Local speed trimming is available through the front-mounted knob supplied with a potentiometer, so the setpoint can be adjusted directly at the drive when an external reference is not used.