Product Description:

Bosch Rexroth Indramat produces the FECC02.1T-B-STD-NNNN-NNNN, a panel-mounted unit in the FEC Frequency Converters series that provides adjustable output power for induction motors during machine startup and normal operation. Its front panel and remote kit provide direct access to operating parameters from outside the cabinet. This arrangement allows local setup and diagnostic review without opening the enclosure. It is intended for installations where a drive interface must remain easy to reach during routine operation, especially when the power section is mounted deeper inside an enclosure.

The housing is built to Design 1, meaning it follows the first mechanical layout released for this model, while the electronics belong to the second generation of the platform. A bright 4-digit LED display shows scaled process values, and the selectable readout group of frequency, output voltage, and output current lets the user check key drive values without additional meters. All menu navigation is executed through sealed touch keys. This membrane-style interface eliminates mechanical switches that could wear out in high-cycle environments and also supports washdown cleaning when the converter is mounted on a door. The front display keeps common process values visible during operation, which makes quick status checks possible without external test equipment.

Status feedback is duplicated by two LEDs dedicated to rotation and operating status, so drive direction and fault state can be checked at a glance. The converter is supplied without a potentiometer, so the speed reference must come from the control system rather than a local dial. For installations where direct panel space is limited, the keypad can be detached and mounted at distances of 1 m, 3 m by using the specified cabling, because remote mounting is supported as a standard feature. This allows the same human-machine interface to be placed on an enclosure door, a pendant, or a control console while the power electronics remain inside the cabinet. Separating the keypad from the power section can also improve visibility when the converter is installed behind a solid panel or internal mounting plate.