Product Description:

The Bosch Rexroth Indramat FECC01.2T-S-STD-POTI-NNNN is an electronic drive module in the FEC Frequency Converters series. Intended for cabinet-mounted variable-speed installations, the unit synthesizes adjustable output frequency from a fixed mains supply, allowing asynchronous or synchronous motors to run at the speed required by conveyors, mixers, or pump stages. Its front panel combines a numeric display with membrane keys so operators can adjust parameters without an external programming device. Digital control loops also support straightforward integration with PLC-based automation architectures.

Operator interaction is centered on 4 control keys that provide direct jog, start, stop, and parameter entry functions. The display can present operating values with 5 significant digits, yet the physical window carries only four numerical positions, so larger figures scroll automatically. Frequency commands are processed in increments of 0.01 Hz, enabling fine speed trimming on low-inertia loads. Three hierarchical menus, basic, application, and diagnostic, are available; the count of 3 structured levels permits quick separation of everyday settings from advanced service parameters. If an overcurrent event occurs, the converter imposes a 5 s Oc fault reset delay before allowing a restart, preventing rapid cycling that could stress connected drives. The unit includes a potentiometer, so speed reference entry can be set from the front panel when required.

As shipped, the default output frequency is 0.00 Hz, while the ceiling is a programmable 50.00 Hz, matching common motor nameplate ratings. The product is Design 2, and the operator display returns to the status screen after 2 min of inactivity, preventing accidental menu stays that could obscure alarms. The converter is a 1st generation platform, and it stores parameters in non-volatile memory so settings are retained after power is removed.