4.95 based on 202 reviews

🙶 Wake was very helpful in getting us a servo motor and drive for our tube mill line. This was the first tim... 🙷

EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN Bosch Rexroth Indramat

MPN: R912007049

No Tariffs On US Orders
  • Rated 4.4 (24 total ratings)
  • Straightforward Pricing: No Rush Fees, No Credit Card Fees
Ask for Availability

Current response time:
6 Minutes 0 Seconds

Preparing your secure checkout page...

The Bosch Rexroth Indramat EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN is part of the EFC Frequency Converters series and features a 7.5 kW heavy duty motor power for three-phase systems. It offers standard vector control SVC, Modbus communication protocol, and an IP20 protection class. The model comes with a Safe Torque Off safety function and is supplied at 400 V.

Quote Request Form:

Warranty
Wake Industrial Warranty

To contact sales for pricing and lead time:

Payment Methods

Visa
Mastercard
AmEx
Wire Transfer

Shipping Methods

DHL
UPS
FedEx
Freight

Our Credentials

Cary Chamber
DUNS Registered
SAM Registered
BBB Accredited

Product Description:

The EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN frequency converter is produced by Bosch Rexroth Indramat and belongs to the EFC Frequency Converters series. It functions as an AC-to-AC inverter that varies output frequency and voltage so three-phase induction motors can run at the speed demanded by pumps, fans, conveyors, or similar automated loads. This control method helps the connected motor match process demand more closely than fixed-speed operation. Classified in product line 02 and the EFC 5610 model group, the unit provides a consistent footprint and parameter structure across multiple power ratings for distributed drive systems.

The converter accepts a mains supply of 400 V AC and supports an input range of 380 to 480 V, allowing direct connection to common plant power without external transformers. Internally it uses standard vector control (SVC) to keep torque available at low speed while responding quickly to load changes. The heavy-duty rating supports motors up to 7.5 kW, which suits medium conveyor sections and process pumps. Power is processed through a three-phase input bridge, helping balance line currents and reduce stress on the supply. Parameter access, status words, and remote commands are exchanged through Modbus, so the drive can communicate with standard PLC registers without additional gateways.

The housing follows Frame Size E, which sets the standard height, width, depth, and mounting hole pattern used for panel installation. Control electronics use the Flex-Control with Standard I/O layout, providing six digital inputs, two analog channels, and a relay output for standalone logic or sequencer tasks. An integrated Safe Torque Off (STO) circuit removes firing pulses to the IGBTs when an emergency input is triggered, preventing the motor from producing mechanical energy. The enclosure carries an IP 20 protection class, so the unit is intended for installation inside a clean control cabinet. Its C3 industrial EMC filter helps limit conducted emissions in factory environments.

Communication Protocol
Modbus
Control Configuration
Standard
Control Section Design
Flex-Control with Standard I/O
Control Type
Standard Vector control SVC
Display Type
None (with dust cover)
EMC Filter Type
Industrial area, class C3
Frame Size
E
Mains Voltage
400 V (AC 380...480 V -15% / +10%)
Model Series
EFC 5610
Motor Power (Heavy Duty)
7.5 kW
Phase Configuration
Three phases
Product Group
Frequency Converter
Product Line
02
Protection Class
IP 20
Safety Function
Safe Torque Off (STO)
Variant
None
  • EFC5610 7K50 3P4 MDA NN NNNNN L1NN
  • EFC56107K503P4MDANNNNNNNL1NN
  • efc5610-7k50-3p4-mda-nn-nnnnn-l1nn

Frequently Asked Questions about EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN:

Q: What communication protocol does the EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN frequency converter use?

A: The EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN supports the Modbus communication protocol for integration with automation systems.

Q: What is the rated motor power for heavy duty applications with the EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN?

A: This frequency converter provides a motor power rating of 7.5 kW in heavy duty operation.

Q: What mains voltage range is required for the EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN?

A: The EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN operates with a three-phase mains voltage range of 380 to 480 V AC, with -15% to +10% tolerance.

Q: What safety function is provided by the EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN frequency converter?

A: This unit features a Safe Torque Off (STO) safety function for increased operational safety in industrial environments.

Q: What is the protection class rating of the EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN?

A: The EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN has an IP 20 protection class, indicating basic protection against solid objects but no protection against liquids.


Internal Product Review

  • ‘‘The EFC5610-7K50-3P4-MDA-NN-NNNNN-L1NN is a Bosch Rexroth Indramat frequency converter built for 400 V three-phase systems. Standard Vector control SVC and Modbus communication give this unit precise motor regulation and straightforward integration into automation networks. IP 20 protection and Safe Torque Off make this converter a strong choice for controlled industrial installations.’’

Motion Industries logo
3M logo
IBM logo
Gexpro Logo
Caterpillar logo
NASA logo
Ford logo
Vallen logo