EFC5610-5K50-3P4-MDA-7P-DRNNN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912007159
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
13 Seconds
The Bosch Rexroth Indramat EFC5610-5K50-3P4-MDA-7P-DRNNN-NNNN is a frequency converter in the EFC Frequency Converters series, featuring a motor power of 5.5 kW for heavy duty and operates on a three-phase 400 V mains supply. It supports Modbus communication protocol, has Flex-Control with standard I/O, and provides standard vector control SVC with an LCD display and potentiometer. This model is protected with an IP20 rating and includes an industrial area class C3 EMC filter.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EFC5610-5K50-3P4-MDA-7P-DRNNN-NNNN is a frequency converter manufactured by Bosch Rexroth Indramat within the EFC Frequency Converters series. It belongs to product line 02 and the EFC 5610 family, and it provides scalable speed control for induction motors used in conveyors, pumps, and packaging systems. Its control configuration is standard, and it uses a Flex-Control section with standard I/O so that local digital and analog signals can drive the inverter without extra option boards. Because no integrated safety function is included, external safety relays or contactors must be used when a stop category is needed.
The converter communicates with higher-level PLCs over Modbus, allowing parameter changes and status polling through a serial register map. It accepts a three-phase supply centered on 400 V AC, with an operating range of 380 to 480 V and a tolerance of -15% to +10%, and it uses a built-in front-end rectifier to create the DC link. Motor control is executed with Standard Vector control SVC; this algorithm maintains stable torque at low speed by dynamically adjusting the voltage-to-frequency ratio. In Heavy Duty mode, the output stage can deliver 5.5 kW to the motor, which covers 7.5 HP class machines running continuous duty cycles. The plastic and metal housing carries an IP 20 protection class, meaning live parts are guarded against finger contact, but the device must be installed inside a closed electrical cabinet.
An internal line filter rated for Industrial area, class C3 attenuates conducted emissions so the drive can be wired alongside sensitive automation electronics. Operator interaction occurs through a Standard LCD display with an integral potentiometer, giving immediate access to frequency setpoints and fault codes without external tools. Mechanical integration is simplified by the compact Frame size E, which aligns with standardized mounting hole patterns for this drive class. The power bridge is designed for three-phase motor connections only, and single-phase loads are not supported.
