Product Description:

The EFC5610-3K00-3P2-MDA-7P-NNNNN-L1NN is a frequency converter produced by Bosch Rexroth Indramat within the EFC Frequency Converters series. As a member of the EFC 5610 model line, it is installed in industrial automation to adjust asynchronous motor speed and torque for process equipment, conveyors, and pump drives. The unit belongs to the frequency converter product group, so it accepts fixed-frequency mains power and delivers a variable output waveform that matches real-time load demands.

For networking, the drive uses the Modbus protocol, allowing basic parameter access from PLCs or HMIs. Motion is regulated with standard vector control (SVC), which maintains flux and torque even at low speed. The power stage is sized for 200 V AC (200 to 240 V ±10%) supplies and delivers up to 3.0 kW in heavy-duty service. Connection to a three-phase feeder reduces line current per conductor and supports regenerative braking when configured. Within product line 02, the device retains a standard control configuration and the Flex-Control section with standard I/O, so digital inputs, relay outputs, and analog channels are available for direct field wiring. Frame size E keeps the mechanical dimensions consistent across the 5610 range.

An integrated EMC filter rated for industrial area, class C3 attenuates conducted emissions, enabling compliance on unshielded cable runs. The housing meets the IP20 protection class, so live parts are finger-safe when the converter is mounted in a sealed panel. For functional safety, the hardware implements Safe Torque Off (STO); when the STO circuit is energized, the power stage is disabled without relying on software commands. A standard LCD display with potentiometer on the front plate provides local parameter editing and real-time speed trimming, supplementing the fieldbus interface.