EFC5610-37K0-3P4-MDA-7P-SVPNN-L1NN
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912007437
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The EFC5610-37K0-3P4-MDA-7P-SVPNN-L1NN Frequency Converter is manufactured by Rexroth Indramat Bosch. The unit is equipped with 37.0kW of Continuous power, 400V connection voltage, and a Modbus Communication module.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch EFC5610-37K0-3P4-MDA-7P-SVPNN-L1NN is a frequency converter. After unpacking, a thorough visual check should be performed to ensure that the correct device has been supplied and that the device is undamaged. For operation as per manufacturer specifications, the EFC5610-37K0-3P4-MDA-7P-SVPNN-L1NN requires the following ambient conditions: altitude of ≤1000 meters, less than 90% relative humidity and -10 to 45 degrees Celsius temperature. The IP20 rated converter enclosure is designed for control cabinet mounting. The frequency converter should be mounted vertically. For converters that are mounted above other converters, the use of an air guide is recommended to ensure that the air from the lower converters does not cause the ambient temperature of the upper converters to exceed the temperature threshold. The recommended minimum horizontal separation between adjacent converters is 400 millimeters.
The EFC5610-37K0-3P4-MDA-7P-SVPNN-L1NN is loaded with a firmware variant that supports sytronix functionality (maximum 400 Hertz output). Other converter features include safe torque off safety feature, Class C3 EMC filter, seven-segment display and SVC motor control algorithm. The output power rating of the EFC5610-37K0-3P4-MDA-7P-SVPNN-L1NN is 37 kilowatts. The input side of the converter is compatible with 3-phase AC mains at 380 to 480 Volts AC. The communication protocol supported by the EFC5610-37K0-3P4-MDA-7P-SVPNN-L1NN is Modbus RTU. The converter can be wall-mounted with screws. It can also be mounted on a DIN rail. Copper wires rated for 90 degrees Celsius or above should be used with the EFC5610-37K0-3P4-MDA-7P-SVPNN-L1NN. The cables must have concentric shielding. The PE cable should have a minimum cross-sectional area of 10 squared millimeters. The recommended fuse size is 125 Amps. The recommended torque for the M6 screws used to mount the converter is 3.8 Nm. This unit can be shipped globally with a one-year warranty period from Wake Industrial.
