EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912007059
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
51 Seconds
The Bosch Rexroth Indramat EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN is part of the EFC Frequency Converters series and offers a heavy duty motor power of 2.2 kW. It supports single phase operation at 200 V AC with a Flex-Control design and standard vector control SVC. The frequency converter features Modbus communication protocol, a standard LCD display with potentiometer, and protection class IP20 cold plate.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN is a member of the EFC Frequency Converters series manufactured by Bosch Rexroth Indramat. As a frequency converter, it modulates the input supply frequency to regulate induction-motor speed in automated machinery, making it suitable for compact low-voltage single-phase installations. It can be used where a small drive is needed for speed control, soft starting, and routine process adjustment on conveyors, pumps, or fans. It is part of the EFC 5610 model family and belongs to product line 02.
This unit communicates with a controller or HMI over the Modbus protocol, so status words and setpoints can be exchanged through a simple two-wire bus. Motor flux is managed by standard vector control (SVC), which adjusts voltage and frequency in real time to maintain torque at low speeds and improve response during load changes. The converter accepts 200 V (AC 200…240 V ± 10%) input power. Power enters on a single-phase line, while the internal inverter reconstructs a symmetrical three-phase output for the motor. In heavy-duty service, the drive supports up to 2.2 kW of mechanical power, which suits small pumps, fans, mixers, and conveyors. The standard control layout and built-in I/O allow direct wiring of discrete sensors and relays without expansion cards.
An integrated EMC filter rated for industrial area, Class C3 attenuates conducted noise for industrial installations. Physical dimensions correspond to frame size D, which keeps mounting points consistent for this housing size and helps cabinet layout remain predictable. The front panel uses a standard LCD display with potentiometer, allowing local speed trimming, parameter access, and fault review without external tools. Protection is limited to IP20 cold plate, so heat must be removed through the mounting surface and the unit should remain inside a control cabinet. The drive does not include an integrated safety function, so any required safe torque off or related safety control must be provided by upstream equipment.
Frequently Asked Questions about EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN:
Q: What is the maximum motor power supported by this frequency converter?
A: The EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN supports motor power up to 2.2 kW in heavy duty operation.
Q: What kind of display and controls does the EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN use?
A: This model features a standard LCD display with a potentiometer for easy operation and monitoring.
Q: Which communication protocol is used by this frequency converter?
A: The EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN provides communication via the Modbus protocol.
Q: What mains voltage range is required for the EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN?
A: This frequency converter is suitable for single-phase mains voltages between 200 and 240 V AC with a ±10% tolerance.
Q: What protection class is provided with the EFC5610-2K20-1P2-MDB-7P-NNNNN-NNNN?
A: The protection class for this model is IP 20 Cold Plate, which offers basic ingress protection against solid objects.
