EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912007044
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
17 Seconds
The Bosch Rexroth Indramat EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN is a frequency converter from the EFC Frequency Converters series with a heavy duty motor power of 1.5 kW and supports three-phase operation. It features a standard vector control type, Modbus communication protocol, and a Flex-Control design with standard I/O. The unit has an IP20 protection class and includes a Safe Torque Off safety function.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN is a frequency converter produced by Bosch Rexroth Indramat in the EFC Frequency Converters series. This drive modulates the output frequency supplied to induction motors, allowing speed and torque adjustment for conveyors, pumps, fans, and similar automated machinery. Intended for cabinet installation, the unit has a front dust cover, and local wiring connects through terminals on the top and bottom edges.
The converter accepts 400 V (AC 380…480 V -15 % / +10 %) input power, allowing direct connection to common industrial mains. In heavy-duty operation, the inverter supports motors up to 1.5 kW, which allows short-term overload capacity without immediate thermal shutdown. A balanced three-phase supply helps reduce current ripple, while Standard Vector control SVC maintains stable flux behavior so the motor can produce rated torque at low speed. Command and diagnostic data are exchanged through Modbus, which allows a PLC or other controller to send setpoints and read fault information without an added gateway. Flex-Control hardware also provides standard digital and analog I/O for start, stop, and speed reference signals when fieldbus control is not required.
The power section uses Frame Size C, which keeps the mounting footprint consistent with other 5610 converters of the same platform. Conducted emission limits are supported by the built-in EMC filter rated for Industrial area, class C3, reducing the need for additional external filtering in typical industrial panels. The enclosure has an IP 20 rating, so it protects against accidental finger contact with internal live parts but still requires installation inside a closed cabinet. A dedicated safety channel provides Safe Torque Off (STO), and when it is activated, the converter internally prevents motor torque generation so the connected machine can coast to a stop. This arrangement supports applications that need an internal torque-inhibit function without relying on external motor contactors for that action.
Frequently Asked Questions about EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN:
Q: What communication protocol is used by the EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN frequency converter?
A: The EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN supports communication over the Modbus protocol.
Q: What mains voltage range does the EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN support?
A: This frequency converter operates with a three-phase mains voltage between 380 and 480 V AC, allowing for a -15% to +10% voltage variation.
Q: What is the maximum motor power supported in Heavy Duty mode by the EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN?
A: The EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN provides a motor power of 1.5 kW under Heavy Duty operation.
Q: Which safety function does the EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN offer?
A: Safe Torque Off (STO) is the integrated safety function on this model, ensuring the drive can safely remove torque to the motor.
Q: What is the protection class of the EFC5610-1K50-3P4-MDA-NN-NNNNN-L1NN?
A: This frequency converter has an IP 20 protection class, which makes it suitable for installation in clean, dry indoor environments.
