EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R912006891
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
6 Seconds
The Bosch Rexroth Indramat EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN is a frequency converter in the EFC Frequency Converters series. It supports three-phase mains voltage from 380 to 480 V and provides 11.0 kW motor power in heavy duty mode. The unit features a Modbus communication protocol, standard vector control SVC, and an IP20 protection class.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN is a variable-speed frequency converter produced by Bosch Rexroth Indramat for the EFC Frequency Converters series. In drive systems, the device translates fixed utility power into a regulated output that matches asynchronous or synchronous motor requirements, allowing speed, torque, and energy consumption to be adjusted in real time. By combining power electronics with vector-based control, it is suited for pumps, fans, and material-handling machinery where steady motor response and adaptable output are required during changing process conditions.
Communication with higher-level PLCs is available through Modbus, giving access to parameter sets and real-time status data. Drive regulation is handled by standard vector control SVC, which maintains motor flux and torque during load transients and low-speed operation. The unit connects to a three-phase supply of 400 V (AC 380...480 V -15% / +10%) and delivers up to 11.0 kW in heavy-duty service. Internally, the inverter’s IGBTs are timed by a 16-bit processor in the Flex-Control section, while standard I/O terminals accept logic signals for run command, direction selection, and fault reset. The power stage is designed for three-phase power, so line protection and conductor sizing must cover all incoming phases.
Operator interaction is provided through a standard LCD display with potentiometer, allowing direct local speed reference adjustment without external control hardware. The integrated EMC filter has an Industrial area, class C3 rating, which helps limit conducted emissions on installations with motor cable lengths greater than 10 m. Mechanical integration is simplified by frame size F, which follows the EFC 5610 mounting pattern and keeps cabinet placement practical in typical 200 mm enclosures. The housing has an IP20 protection rating, which is suitable for protected cabinet installation. No onboard safety function is included, so emergency stop and safe torque off requirements must be handled by external system components.
Frequently Asked Questions about EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN:
Q: What communication protocol does the EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN frequency converter support?
A: This model uses the Modbus protocol for communication with external devices.
Q: What mains voltage range is supported by the EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN?
A: The converter operates at a mains voltage of 400 V, with supported ranges from AC 380 to 480 V and tolerances of -15% to +10%.
Q: What is the heavy duty motor power rating for the EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN?
A: The EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN is rated for 11.0 kW motor power in heavy duty applications.
Q: What protection class does the EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN conform to?
A: This frequency converter is protected to IP 20, providing basic protection against solid objects larger than 12.5 mm but no protection against liquids.
Q: What type of display is on the EFC5610-11K0-3P4-MDA-7P-FCPNN-NNNN frequency converter?
A: The display features a standard LCD with a potentiometer for direct adjustments.
