Product Description:

The EFC5610-0K75-3P4-MDA-7P-FCPNN-L1NN belongs to the EFC Frequency Converters series manufactured by Bosch Rexroth Indramat. As a compact AC drive, it modulates the voltage and frequency delivered to an induction motor so that conveyor sections, pumps, or fans can be matched precisely to process demand. This control strategy improves energy use and reduces mechanical wear in automated lines that require variable-speed operation under stable torque conditions. It is also suitable for applications that benefit from controlled acceleration, stable running speed, and smoother starts and stops.

For electrical integration, the converter has a protection category of IP20, so it must be mounted inside a cabinet to prevent dust entry and accidental finger contact. It relies on natural cooling, so the aluminum chassis and a cold-plate loss of 24 W dissipate heat without forced airflow. When powered from 380 V mains, the input side draws 2.6 A, and the inverter section can deliver up to 1.5 kVA of apparent power to the load, matching its continuous motor rating of 0.75 kW. Mechanical dimensions are 95 mm in width, 124 mm in depth, and 166 mm in height, which helps the unit fit dense cabinet layouts. Control and power terminals are tightened to 1.00 N·m, the power cable size is 2.5 mm², and the net weight is 1.1 kg.

The output stage supplies 2.3 A at 380 V, so downstream circuit breakers must coordinate with the internal semiconductor limits. A line-side fuse rating of 10.0 A protects against short-circuit events, while steady-state heat dissipation is 37 W. Parameter sets and diagnostic data are transferred through the built-in RS485 interface, allowing multi-drop networking with PLCs. The serial link also supports parameter access and status exchange without a separate fieldbus card. Because separate fans are unnecessary, enclosure space can remain available for wiring and nearby control hardware.