Product Description:

The EFC5610-0K40-1P2-MDB-7P-NNNNN-NNNN is an AC frequency converter built by Bosch Rexroth Indramat and supplied within the EFC Frequency Converters series. Falling under the EFC 5610 model range, the unit conditions single-phase mains power and modulates it to a variable output frequency so induction or permanent-magnet motors can be speed controlled in automated machinery, conveyors, and pumps. As a dedicated converter, it sits between the plant supply network and the motor, delivering vector-regulated torque without mechanical gear changes. This arrangement lets compact machines adjust speed and motor response through the drive instead of relying on fixed transmission components.

At the control level, it communicates over Modbus, allowing direct parameter access from a PLC or other supervisory controller. The internal layout uses Flex-Control architecture with standard I/O terminals, so wiring is direct to common digital and analog signals. Motion is handled by the Standard Vector control SVC algorithm, which supports stable torque production at low speed. With a heavy-duty rating of 0.4 kW, the converter operates from a 200 to 240 V AC network with a permitted variation of ±10%. It accepts a single-phase feed, which suits light machines that do not have a three-phase service.

Operational feedback is provided by a Standard LCD display with potentiometer, so speed references and basic values can be checked locally from the front of the unit. Conducted emissions are limited by an integrated filter rated for Industrial area, class C3 installations. The mechanics are packaged in Frame size B and use a cold-plate heat sink; when mounted in a cabinet, the enclosure has an IP20 protection rating. The converter is listed under product line 02 for ordering, and the cabinet structure is expected to provide the surrounding physical protection used in normal installation.