Product Description:

The EFC5610-0K40-1P2-MDA-7P-NNNNN-NNNN is a frequency converter produced by Bosch Rexroth Indramat as part of the EFC Frequency Converters series. It modulates the speed of small-frame induction motors so that conveyors, pumps, or fans can match process demand instead of running at fixed mains frequency. By converting single-phase supply power into a controlled three-phase output with vector regulation, the unit provides basic open-loop speed control for industrial automation. This arrangement suits compact equipment that needs adjustable motor output from a simple power source.

In heavy-duty operation, the converter delivers a rated motor power of 0.4 kW, matching small machines that need variable speed. It is intended for low-voltage installations and accepts a nominal input of 200 V (AC 200–240 V ±10%); within this window, the rectifier and inverter maintain stable DC-link voltage. Because the supply is single-phase, the unit can be wired directly to standard building branch circuits without a three-phase service. Motor flux is regulated through standard SVC vector control, which improves torque response at low speeds compared with simple V/Hz methods. The integrated EMC filter is rated for industrial area, Class C3, so conducted emissions remain within industrial limits when long motor cables are used.

Parameter access is handled through Modbus, letting PLCs adjust drive settings over a two-wire serial link. The housing meets IP20, meaning fingers are protected from live parts, but the drive must be mounted inside a cabinet for dust and water protection. Mechanical layout corresponds to frame size B, which sets the height and mounting hole pattern within the EFC5610 range. A front-mounted standard LCD display with potentiometer offers on-device speed reference and status feedback. The Flex-Control section uses standard I/O and a standard control configuration, and the unit is part of product line 02.