Product Description:

The EFC5610-0K40-1P2-MDA-7P-NNNNN-L1NN is a frequency converter produced by Bosch Rexroth Indramat for the EFC Frequency Converters series. Within small automation cabinets, it converts constant mains power into a variable output frequency to control motor speed and process flow. This gives compact machines a practical way to match shaft torque to load demand while supporting efficient operation in conveyors, pumps, and auxiliary equipment. It is intended for installations where space is limited but dependable motor speed control is still required.

It operates from a 200...240 V supply on a single-phase network, allowing direct connection to light industrial branches without an isolation transformer. Conducted emissions are limited by a built-in filter rated for Industrial area, class C3. In heavy-duty service, the inverter delivers 0.4 kW to the motor, and torque is regulated by Standard Vector control SVC, which helps maintain stable flux during starting and low-speed operation. The standard control setup supports basic run, jog, and fault functions through the onboard interface, which keeps routine operation straightforward. Direct use on common branch power also suits smaller standalone machines and support equipment.

Housing protection reaches IP 20, which is suitable for clean enclosures where accidental contact must be limited and airflow is still required. The drive uses frame size B, and its front panel includes an LCD display with a potentiometer for local setpoint changes. Communication with PLCs is handled through the integrated Modbus interface, so external gateway hardware is not required. That connection can carry operating commands, status information, and reference values between the drive and the control system. For functional safety, the unit provides Safe Torque Off (STO), and the hardware is part of product line 02 with a Flex-Control section and standard I/O.