Product Description:

The EFC3610-22K0-3P4-MDA-NN-NNNNN-NNNN belongs to the EFC Frequency Converters series produced by Bosch Rexroth Indramat. This frequency converter sits between the mains supply and an induction motor, where it adjusts output voltage and frequency to provide variable-speed control for automated machinery, conveyors, and pump systems. That operating role makes it suitable for process equipment that needs controlled acceleration, speed adjustment during runtime, and reliable motor operation under changing load conditions.

The converter exchanges data with a PLC or HMI over the Modbus fieldbus and applies Enhanced V/Hz control to help maintain stable motor torque across the speed range. A built-in EMC filter rated for Industrial area, class C3 reduces conducted emissions in typical factory electrical environments. It accepts a nominal mains supply of 400 V (AC 380…480 V -15 % / +10 %) and is wired for three phases, which matches common industrial power distribution. In heavy-duty mode, the power section delivers up to 22.0 kW of mechanical output, allowing the drive to run medium-sized pumps, compressors, and similar loads. These electrical characteristics support installation in standard industrial control cabinets without requiring unusual supply arrangements.

Mechanical integration uses the compact Frame Size G housing, and the touch-safe terminals are protected to IP 20 for installation inside a closed cabinet. Command inputs and relay outputs are provided through the Flex-Control with Standard I/O architecture, while the parameter set follows Product Line 02 for consistency across adjacent ratings in the same platform. The front panel has no display for local navigation, so setup and command handling are performed through the available control interfaces. The unit also does not include an integrated safety stop, so emergency shutdown functions must be handled by external control hardware.