DMA 140D 8001-D Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: 1070080455
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DMA 140D 8001-D is a 3-phase servo drive module in the DMA Servo Drive Modules series and weighs 19.3 kilograms. It has a rated current of 87 Arms at 4 kHz, supports a DC link voltage of 670 VDC, and uses air cooling with two fans. The module has a cabinet power loss of 700 watts and a depth of 288 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DMA 140D 8001-D is a servo drive module produced by Bosch Rexroth Indramat within the DMA Servo Drive Modules series. The unit functions as a three-phase power stage for both synchronous and asynchronous motors, forming the energy interface between a DC bus and individual axes. In industrial automation cabinets, it contributes torque and speed regulation while the higher-level controller handles trajectory planning, making it a core component for packaging machines, printing lines, and general material-handling equipment.
Its power input is a non-regulated DC link of 715 VDC that the internal converter stabilizes to 670 VDC when regulation is active. With a switching frequency of 4 kHz, the module can deliver up to 141 Arms in overload conditions and sustain 87 Arms continuously in closed-loop operation. These current levels suit motors used on demanding axis loads. The open-loop U/f control mode is used when no encoder feedback is required, so the design has no encoder interface and no dedicated positioning control. Cooling air is drawn through the backplane, and the specified cabinet power loss is 700 W, which is important when planning enclosure ventilation. The backplane slot type is RMD/DM, and there are no additional functional option cards, so wiring is limited to power, DC bus, and setpoint channels.
The drive is intended for cabinet integration and stands 504 mm high, 288 mm deep, and weighs 19.3 kg. Forced airflow is provided by two axial blowers. The continuous current capability decreases by 2.25 A/K above the rated temperature rise, a derating figure used when sizing higher-duty cycles. Logic electronics are supplied from an external 24 V source that draws 1.58 A, and the analog setpoint channel is digitized with a 10-bit resolution so that motion controllers can issue finely spaced speed commands without encoder feedback.
Frequently Asked Questions about DMA 140D 8001-D:
Q: Which series does the DMA 140D 8001-D module belong to?
A: The DMA 140D 8001-D belongs to the DMA Servo Drive Modules series.
Q: How is the DMA 140D 8001-D module cooled during operation?
A: This model requires air cooling through the backplane and comes equipped with two fans.
Q: What is the maximum current output supported by DMA 140D 8001-D at 4 kHz (open loop)?
A: The DMA 140D 8001-D supports a maximum current of 141 Arms at 4 kHz in open loop mode.
Q: What is the setpoint resolution for the DMA 140D 8001-D module?
A: Setpoint signals for the DMA 140D 8001-D module have a 10-bit resolution.
Q: How much cabinet power loss does the DMA 140D 8001-D Servo Drive Module generate?
A: The cabinet power loss for this drive module is 700 W when in operation.
