1070077608-217 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat 1070077608-217 is a drive module in the DMA Servo Drive Modules series featuring a rated current of 28 Arms at 4 kHz and 23 Arms at 8 kHz. The drive supports a 24 VDC input at 1.23 A and provides analog resolution of 16 bits along with single-turn and multi-turn encoder resolutions of 20 bits and 32 bits, respectively. The module measures 521.5 mm in height and 50 mm in width.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The 1070077608-217 belongs to the DMA Servo Drive Modules series manufactured by Bosch Rexroth Indramat. As a servo drive module, it accepts energy from a shared DC bus and delivers phase-controlled output currents to matched servo motors. Within automated assembly cells and material-handling systems, the module executes closed-loop speed and torque commands, allowing machine axes to accelerate, hold position, or follow dynamic motion profiles under PLC supervision.
The control section samples reference signals through an analog speed and torque setpoint interface with a resolution of 16 bits, while feedback can be processed from gear, STG, or MTG encoders. The nonregulated DC link measures 715 VDC, and the connected power supply maintains a regulated link of 670 VDC. During fast cycles, the inverter can deliver a peak phase current of 35 Arms at a 4 kHz switching frequency, with a continuous rating of 28 Arms. At the same switching frequency, thermal derating above 45 °C is 0.65 A per kelvin. A 24 VDC logic input draws 1.23 A to keep the control electronics active when the power stage is disabled. Single-turn position values are digitized to 20 bits, allowing the drive to resolve 1,048,576 discrete shaft angles per revolution.
When operated at 8 kHz, the module sustains a peak phase current of 32 Arms and a continuous output of 23 Arms. The higher switching frequency lowers acoustic noise but decreases thermal capacity, with derating above 45 °C set at 0.45 A per kelvin. The module has a height of 521.5 mm and a width of 50 mm, allowing multiple units to be mounted side by side in a control cabinet. Multi-turn feedback uses 32 bits across 4,096 revolutions, allowing absolute position data to be recovered after a loss of power.
