Product Description:

The DKS01.1-W030B-DA10-00 belongs to the DKS Intelligent Digital Servo Drives series produced by Bosch Rexroth Indramat. As a digital servo drive, it works with motion controllers to regulate torque, speed, and position in automated machinery. This makes it suitable for servo axes that require accurate response during acceleration, deceleration, and position holding. The unit accepts DSF feedback so the control loop can compare commanded and actual motion values during operation. It is housed in an IP10 enclosure that relies on internal heat dissipation instead of forced airflow.

An analog monitor channel provides a signal of ±10 V DC for real-time observation of operating values. That monitor output can be used to follow changing drive conditions without interrupting machine operation. Dynamic braking energy is absorbed by an integrated bleeder rated for 0.3 kW continuously and up to 5 kW for short transients, which helps prevent DC-bus overvoltage during rapid deceleration. The power section accepts 230 V AC with a ±10% tolerance from a single-phase or three-phase supply and rectifies it to an internal bus of 300 V DC. That DC bus feeds the inverter stage so motor current can be regulated with stable internal power. The inverter operates at a switching carrier of 18 kHz to support smooth motor current and reduced audible noise.

The mains interface supports operation from 50 to 60 Hz, allowing use on common industrial power systems without tap changes. Continuous output current is rated at 30 A, which allows the drive to supply sustained motor current for servo applications within its operating range. Heat is transferred through the metal baseplate, so no additional fan is required on the unit itself. Ambient temperature can range from 5 °C to 45 °C at full rating, with derating permitted up to 55 °C when cabinet ventilation is limited. Operation is also permitted at altitudes up to 1000 m, which helps preserve thermal performance under normal installation conditions.