DKR03.1-W100N-BE45-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911277254
The Bosch Rexroth Indramat DKR03.1-W100N-BE45-01-FW is a digital intelligent AC drive controller in the DKR Drive Controllers series. It has a continuous power output of approximately 26 kW at 4 kHz and a weight of about 49 kilograms. The drive features a SERCOS command interface, operates with AC 230 V control voltage, and uses air cooling with a built-in blower.
Internal Product Review
The DKR03.1-W100N-BE45-01-FW is a digital intelligent AC drive controller with a SERCOS command interface and built-in blower air cooling. Operation on 3xAC 400 to 480 V supports demanding installations, and the ca. 26 kW continuous drive power at 4 kHz gives the package strong industrial capability. Digital servo and resolver feedback adds dependable motion response, making the controller a strong choice for higher-power automation systems.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DKR03.1-W100N-BE45-01-FW is a digital intelligent AC drive controller manufactured by Bosch Rexroth Indramat within the DKR Drive Controllers series. Intended for multi-axis machinery and high-power servo motor groups, the unit converts mains power into regulated three-phase output while exchanging motion commands over a fiber-optic bus with upstream CNC or PLC hardware. By integrating power electronics and real-time control in one enclosure, the controller performs the velocity, torque, and position regulation used in automated assembly lines, presses, and packaging systems.
Its communication layer uses the SERCOS interface, allowing real-time data exchange at 4 kHz, and the drive can supply a continuous current of 71 A. At the same switching frequency, the power section is rated for 26 kW, which supports sustained operation under load. Logic circuits are energized by a separate AC 230 V control supply so memory and diagnostics remain active when the main bus is isolated. For mains connection, the power stage accepts 3×AC 400–480 V with a tolerance of ±10%, matching common industrial distribution networks. Internal cooling relies on a built-in air blower that forces airflow across the heat sinks to keep semiconductor temperatures within limits. The rated peak current matches the continuous value, so short transients are handled through control bandwidth rather than current oversizing.
Heat removed by the blower is quantified as 900 W, a value that is useful for cabinet climate calculations. The unit has a mass of 49 kg, so the mounting structure must support a comparatively heavy drive package. The power section has a current rating of 100 and belongs to line series 03, while the control board is design version 1 with function module version 01. The unit has no bleeder on the rigid DC bus, so external braking resistors cannot be connected and motor energy must be recovered by the mains or dissipated mechanically. Digital servo and resolver feedback channels are supported for precise rotor position reporting to the drive.
