Product Description

The FWA-ECODR3-CRP-05VRS-MS is an encoder plug-in module for DKC 040, 100 and 200 drives. It is manufactured by Bosch Rexroth Indramat as an AC servo amplifier drive controller firmware module tool for the drives in the DKC series. The FWA-ECODR3-CRP-05VRS-MS belongs to the ECODR3 series with a 5 FW series. The DC bus nominal voltage and the rated current of the module is factory assigned. It also features a standard firmware while the release status is that at the time of the update. The rated current of the drive that it can be applied to can be between 4 A and 18 A.

When it comes to its application, the FWA-ECODR3-CRP-05VRS-MS is suitable for all drives manufactured by Rexroth. It can only be used for applications outside this when specified by the manufacturer and can be easily plugged into the machine it is being applied to. The FWA-ECODR3-CRP-05VRS-MS can only function effectively when the DKC drive is was applied to it installed in the right position and ambient conditions and temperature. Any inappropriate use can lead to the damage of the encoder plug-in module and even damage the entire DKC drive.

The DKC drive controllers that require the FWA-ECODR3-CRP-05VRS-MS can either have a SERCOS or analog/parallel interface. They can also be without master communication. To install the FWA-ECODR3-CRP-05VRS-MS AC servo amplifier drive controller into the DKC drive, one has to ensure the drive is turned off and follow the instructions provided by the manufacturer. The encoder plug-in module must also be protected from damages caused by water and moisture, metal oil and dust, and impact from external objects. The FWA-ECODR3-CRP-05VRS-MS can only be applied in Rexroth EcoDrive Cs Drive Controllers. This unit can be shipped globally with a one-year warranty period from Wake Industrial.