Product Description:

The DKC10.3-008-3-MGP-01VRS belongs to the DKC Drive Controllers series manufactured by Bosch Rexroth Indramat. It is an EcoDrive unit intended to regulate servo axes in modular automation lines by converting command signals into controlled motor current and voltage. Through its multi-interface, general-purpose control platform, the controller can be integrated with a variety of motion control networks to coordinate position, velocity, and torque loops for machinery such as pick-and-place stations, indexing tables, and material handling modules. This allows one drive platform to support synchronized axis movement in compact automation cells without requiring a different controller format for each network type.

The controller operates from a DC bus held at 300 V, which supplies the intermediate energy used by the inverter stage to generate three-phase output for the connected motor. During continuous duty, the drive can deliver a rated phase current of 8 A, allowing steady motor operation within the intended load range of a compatible servo axis. At startup or during rapid acceleration, the supply section may momentarily draw a maximum input current of 1.3 A, so the incoming circuit must accommodate brief current peaks. Operation is permitted in ambient air temperatures up to 40 °C, and higher temperatures require derating or added cooling. Internal losses reach 200 W at rated current, so cabinet ventilation must remove heat from the unit and nearby electronics.

The housing weighs 1.8 kg, which helps keep panel mounting loads low in compact cabinets and makes placement beside other control components easier. The unit is revision 3 in this product line, indicating the third design layout used in the series. It uses version 01 for its basic command and diagnostic set, and interface option 10 provides the multi-protocol communication layer used for network integration. This combination supports consistent control behavior and standard fieldbus wiring in EcoDrive systems.