DKC10.3-004-3-MGP-01VRS Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911295609
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DKC10.3-004-3-MGP-01VRS is part of the DKC Drive Controllers series and weighs 1.8 kilograms. This EcoDrive controller has a rated current of 4 Amps, a DC-bus nominal voltage of 300 V, and a maximum input current of 1.1 Amps. It is designed for operation in environments up to 40°C and has a power dissipation of 100 Watts at continuous current.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DKC10.3-004-3-MGP-01VRS is an EcoDrive controller manufactured by Bosch Rexroth Indramat within the DKC Drive Controllers series. It manages power exchange between the supply network and a synchronous or induction motor, providing closed-loop regulation for speed and torque in automated machinery. The unit is suited for general motion applications where a compact drive must respond accurately to command signals from the control system. Its communication setup allows the same controller platform to fit different machine layouts without requiring extra interface cards. This makes it useful in equipment that needs reliable motor control but has limited cabinet space.
The controller operates from a stabilized DC link of 300 V, which supplies the inverter section during motor control. It can deliver a continuous output current of 4 A to the motor, while the input side draws no more than 1.1 A under the stated operating conditions. Heat loss reaches 100 W at rated load, so the enclosure needs adequate airflow to prevent excessive internal temperature rise. This level of output suits smaller axes where low cabinet demand and controlled heat buildup are important. The unit is intended for ambient temperatures up to 40 °C, and operation above that point requires derating or added cooling. Good panel ventilation also helps protect nearby components from unnecessary heat exposure during continuous operation.
The compact housing has a mass of 1.8 kg, making it suitable for space-limited mounting plates and smaller control cabinets. The unit is Design 3, indicating the third design version of this controller format. Interface option 10 provides the selected communication arrangement for the drive, so command and status exchange can match the intended control architecture. The software version is 01, which keeps controller behavior consistent with the listed operating functions. Its low weight also reduces mechanical load on the mounting surface when several drives are installed in the same panel.
Frequently Asked Questions about DKC10.3-004-3-MGP-01VRS:
Q: What is the DC-bus nominal voltage of the DKC10.3-004-3-MGP-01VRS?
A: The DKC10.3-004-3-MGP-01VRS controller has a DC-bus nominal voltage of 300 V.
Q: What is the rated current of the DKC10.3-004-3-MGP-01VRS controller?
A: This drive controller is rated for a continuous current of 4 A during operation.
Q: What is the maximum ambient operating temperature for the DKC10.3-004-3-MGP-01VRS?
A: The maximum ambient temperature for the DKC10.3-004-3-MGP-01VRS is 40°C.
Q: What is the maximum input current required by the DKC10.3-004-3-MGP-01VRS?
A: The DKC10.3-004-3-MGP-01VRS has a maximum input current of 1.1 A.
Q: What is the power dissipation of the DKC10.3-004-3-MGP-01VRS at continuous current?
A: This unit dissipates 100 W of power at continuous current.
