DKC04.3-004-3-MGP-01VRS Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
Wake Industrial LLC is not an authorized distributor of this product.
The Bosch Rexroth Indramat DKC04.3-004-3-MGP-01VRS is an EcoDrive from the DKC Drive Controllers series with a rated current of 4 Amps and a DC-bus nominal voltage of 300 Volts. The drive supports a maximum ambient temperature of 40°C and has a weight of 1.8 kilograms.
Internal Product Review
The DKC04.3-004-3-MGP-01VRS is a Bosch Rexroth Indramat EcoDrive controller with a 300 V DC-bus nominal voltage and 4 A rated current. A 1.1 A maximum input current and 100 W power dissipation give the unit efficient electrical behavior and manageable thermal loading in control cabinets. A solid option for dependable drive control in streamlined automation platforms.
Have a part to sell?
Wake Industrial Warranty
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
Bosch Rexroth Indramat manufactures the DKC04.3-004-3-MGP-01VRS as part of the DKC Drive Controllers series. Within an automation cell, this controller forms the electronic link between a common DC-bus and one servo axis, translating motion commands from a PLC into regulated motor currents. By doing so, it maintains commanded speed and position profiles for conveyors, pick-and-place units, and other machinery that requires consistent, digitally supervised drive performance.
The module delivers a continuous output of 4 A, establishing the maximum motor phase current that can be supplied without thermal derating. Its internal DC link is rated at 300 V, so energy exchanged during motoring or regenerating remains within a predictable voltage window. Under worst-case inrush or braking events the mains side draws only 1.1 A, aiding panel designers who must size upstream protection. Heat generated by the power stage is quantified as 100 W at the rated current, and this value drives cabinet ventilation calculations. Reliable service is specified up to 40°C ambient; above this limit the unit may require forced cooling or current derating. Mechanical integration is straightforward because the housing weighs just 1.8 kg, allowing installation on light DIN-rail or back-panel structures without added bracing.
This controller belongs to the EcoDrive product type, meaning it shares a firmware platform optimized for energy-sharing multi-axis systems. The installed code set is classified as Multi interface, general purpose, enabling parameter access over analog, SERCOS, or parallel I/O without additional option cards. Revision identifiers—design number 3, interface option 04, and firmware version 01—help maintenance staff match spare units to existing machine images, reducing commissioning time. Together, these configuration markers complement the electrical limits defined earlier and provide a complete profile for selection, replacement, or diagnostic tasks in industrial motion applications.
