The Rexroth Indramat DKC03.3-100-7-FW is a servo amplifier drive controller part of the DKC series. The drive is also known as an Ecodrive03 device. Ecodrive03 is an efficient automation system made up various Indramat products. Versatile in use, the system excels in many industry applications.
With the DKC03.3-100-7-FW, you can operate and control a variety of motors. Some models may need extra sensors for full monitoring and adjusting functionality. Compared to similar drives, DKC series drives cost less and are of the same quality. The device can is configurable with both single-axis and multi-axis servo motors. A user can program the drive before installation so that once in use, the automation system works. This device uses the Profibus-DP command interface in regards to field bus communications.
The ambient temperature of the DKC03.3-100-7-FW can reach up to 55 degrees Celsius, but will only function optimally at up to 45 degrees Celsius. It can be stored at temperatures as low as -35 degrees Celsius to as high as 85 degrees Celsius. The weight of this device is 9.7kg while its height is 360mm. The rated control voltage is 24V while the voltage rating is 700V. It is IP20 protected making it protected against dust penetration. The maximum output current for this servo drive is 100A and the maximum input current is 40A.
|Servo Amplifier Drive Controller Unit||DKC|
|Voltage Rating||DC 700V|
|Firmware Version||Factory Assigned|
|Nature of Firmware||Factory Assigned|
Wake Industrial sells new surplus and reconditioned products. This website is not sanctioned or approved by any manufacturer or tradename listed. Wake Industrial is not an authorized distributor or representative for the listed manufacturers. Designated trademarks, brand names and brands appearing herein are the property of their respective owners.
Copyright 2019 - Wake Industrial - All Rights Reserved