DKC02.3-008-3-MGP-01VRS Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911295606
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat DKC02.3-008-3-MGP-01VRS is part of the DKC Drive Controllers series and weighs 1.8 kilograms. Designed as an EcoDrive, it operates with a rated current of 8 Amps and a DC-bus nominal voltage of 300 Volts. This controller can handle a maximum input current of 1.3 Amps and is designed for ambient temperatures up to 40°C.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DKC02.3-008-3-MGP-01VRS drive controller is produced by Bosch Rexroth Indramat and belongs to the DKC Drive Controllers series. Within EcoDrive systems, it performs the closed-loop power conversion that links a shared DC supply to a single servo axis, delivering controlled current and voltage to maintain commanded speed or torque. Its wiring concept supports use of the unit as the coordinating element in automated presses, material-handling portals, and filling machines that require accurate, repetitive positioning.
The controller is fed by a DC bus that operates at 300 V, so upstream rectifiers and neighboring axes must share the same intermediate circuit level. During operation, it can supply a continuous phase current of 8 A, which sets the thermal limits of the motor-drive pair under steady mechanical load. Inrush demand on the AC side is limited, with a maximum input current of 1.3 A; this eases protection-device sizing and reduces cabinet heat. Even at full rated output, internal losses remain at 200 W, allowing the unit to be cooled by standard control-cabinet airflow without additional heat exchangers.
The hardware is identified as Design 3, which aligns connector placement and mounting holes with other third-revision EcoDrive modules. The unit uses a multi-interface control package, and its update level is 01; this revision supports SERCOS, analog velocity, and pulse-direction command modes without external option cards. Communication terminals are supplemented by the configurable I/O set in Interface Option 02, allowing direct sensor and limit-switch wiring. Continuous duty is allowed up to 40 °C ambient, which matches typical sealed-cabinet operation. The housing mass of 1.8 kg permits DIN-rail or panel mounting without reinforcing the backplate, simplifying multi-axis stacking beside other automation hardware.
Frequently Asked Questions about DKC02.3-008-3-MGP-01VRS:
Q: What is the DC-bus nominal voltage rating for the DKC02.3-008-3-MGP-01VRS drive controller?
A: The DKC02.3-008-3-MGP-01VRS has a DC-bus nominal voltage of 300 V.
Q: What is the rated current of the DKC02.3-008-3-MGP-01VRS model?
A: The rated current for this model is 8 A, supporting moderate drive loads.
Q: What is the power dissipation at continuous current for this drive controller?
A: The drive controller dissipates 200 W of power at continuous current.
Q: What is the maximum ambient temperature the DKC02.3-008-3-MGP-01VRS can operate in?
A: The DKC02.3-008-3-MGP-01VRS is designed for ambient temperatures up to 40°C.
Q: What design and interface option version does the DKC02.3-008-3-MGP-01VRS feature?
A: This unit is a Design 3 model with interface option 02, offering specific configuration compatibility.
