Product Description

The DDS03.2-W050-BE41-01-FW drive controller manufactured by Bosch Rexroth helps in controlling and monitoring the operation of an AC motor. The controller has to be programmed prior to its commissioning so that the required functions are performed by the motor. The product is associated with a diagnostic message for each of its operational states. This device portrays a line code of 02. The unit can be used with a wide range of inductance, inductance linear, synchronous and synchronous linear motors to render a digital drive system. Multiple drives together can be combined as a compact package that uses just one power supply. This gives the controller a modular design.

The drive controller in conjunction with an AC motor functions like a rapid response drive. The product must be used only with power supplies that render a 24VDC regulated voltage. The device is to be properly and correctly transported, stored, assembled and installed for safe and optimum operation. The unit is supposed to be disconnected from the mains during maintenance or repair and secured against getting switched on again. It is designed for installation in a control cabinet. The product can be dispatched to any global address.

This device has an H1 display which functions as an optical display to highlight the diagnostic message. The unit has a discharge current of more than 3.5mA. It must be connected with the earth wire before its start-up. The controller shows signs of dangerous movements due to faulty wiring or cabling or incorrect use of components in the connected motor. The product portrays a slot at the top of the front panel for its software module and a few other slots at the bottom of the panel. The device may require air conditioning for its cooling. The unit needs a separate software module for each function. The drive controller is associated with its one-year warranty support.