Product Description

Bosch Rexroth is a reputable manufacturer of industrial equipment. The company manufactures a variety of motion control device series, including drive controllers, frequency converters, and servo motors.

The DDS02.2-W200-BE18-01-FW model weighs 7.5 kilos and is equipped with both a digital and resolver feedback system, as well as a steady current supply of 65 amps. Additionally, its design conforms to the IP 20 material protection category and has a 300-volt DC bus voltage. When combined with MDD, LAR, or MKD AC motors, the DDS02.2 drive controller creates a quick action drive. A SERCOS interface module is utilized to communicate with the drive controller. The U5 slot contains the drive firmware (software module), whereas the U1 slot contains the command communication module. One of the primary advantages of using this motor drive controller is the precise control of the motor's speed and direction. The maximum installation height permitted by the manufacturer is 1000 meters, and power output may decrease after that height. Thermal technology is used by the DDS02.2 drive controller to adjust the ambient temperature by circulating air from inside the control cabinet. The drive controller's maximum current rating is 200 A, and the maximum air humidity allowed during operation should be less than or equal to 25 g/m³.

The model DDS02.2-W200-BE18-01-FW is designed to operate between 0 and +45 degrees Celsius and 95 percent humidity, and it includes a 24 V (direct current) power supply for connection to the main power source. Five (5) distinct module slots are included in the model (DDS02.2-W200-BE18-01-FW). Each U1–U5 slot may include a variety of modules, depending on the user's requirements. The base unit may be modified to execute a broad variety of tasks via the use of multiple modules.