DDS03.3-W030-B
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911281028
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
DDS03.3-W030-B is a DDS series drive controller from Bosch Rexroth. It supports digital servo feedback and resolver feedback. Rated output of the unit is 30 Amps.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
DDS03.3-W030-B is a DDS03.2 series drive controller. It is especially designed by Bosch with support for two feedback methods: digital servo feedback and resolver feedback. It is compatible with many motor product lines, including MDD synchronous motors, MKD synchronous motors, LAR linear motors, LAF linear motors, LSF linear motors, 2AD inductance motors, 1MB inductance motors, MBW inductance motors, and ADF inductance motors. Operators can use it with supplies that deliver 24 Volts DC regulated output. Charging resistors must be used when powering up the drive with some TVM supplies. Details can be seen in the product documentation. There is a barcode sticker on the DDS package. It identifies the contents in type and order processing. In addition, there is a rating plate on the front of the controller. The controller must be stored in a dry, dust and shock free environment. Storage is permissible at temperature range of -30 to +85 degrees Celsius. Bosch recommends using shock-absorbing supports during transport, if required. The operating temperature recommended by Bosch is 0 to 45 degrees Celsius. Rated output of the DDS03.3-W030-B controller is 30 Amps. The DC bus on the unit carries 300 Volts DC. Weight of the controller is 5.5 kilograms. Dimensions of the unit are: 355 millimeters height, 70 millimeters width and 325 millimeters depth. The basic unit of the DDS03.3-W030-B has a slot for a plug in module. Slot U5 is dedicated for a software module and slot U1 is dedicated for a command communication module. The controller is connected to the motor via a power cable and a feedback cable. Feedback allows accurate control of motor speed and position. Trained personnel with relevant experience should participate in controller operation.
Frequently Asked Questions about DDS03.3-W030-B:
Q: Which feedback methods does the unit support?
A: This DDS03.2 series controller supports both resolver feedback and digital servo feedback.
Q: What are the controller dimensions?
A: Dimensions of the controller are 355 x 70 x 325 millimeters.
Q: How can you identify the controller?
A: A rating plate attached to the unit allows identification.
Q: What are spacing requirements?
A: Spacing requirements are 40 millimeters in front and 80 millimeters on the top and bottom.
Q: Where are the air inlet and outlet located?
A: The air inlet is at the bottom and the outlet is at the top.
