Product Description:

The DDS03.1-W030-DA01-00/S002 is a digital AC servo drive controller produced by Bosch Rexroth Indramat for the DDS Drive Controllers series. It accepts reference commands from higher-level motion systems and supplies controlled three-phase power to matched servo motors, allowing closed-loop regulation of torque, speed, and position in automated assembly lines, material-handling gantries, and processing equipment. When combined with modular supply and mains filter units, the drive forms a compact axis module that simplifies panel layout inside industrial control cabinets. In a typical multi-axis system, it serves as the link between the motion controller and the motor, turning command signals into regulated electrical output for accurate axis response. The cabinet-mounted format also helps keep power wiring and control connections organized within the machine enclosure.

The drive exchanges setpoint and diagnostic data through an analog interface, a format suited for legacy PLCs and stand-alone process controllers. Heat generated by the power electronics is removed by internal air cooling, which draws cabinet air across the heat sink without the need for external ducts. Position verification relies on digital servo feedback from the connected motor, enabling high-resolution monitoring of incremental movement. Power output stages are rated for 30 A of continuous current, providing headroom for medium-torque axes. The unit operates in ambient temperatures from 0 to 45 °C, so it can run beside other heat-producing devices when normal cabinet airflow is available. This combination supports machines that use analog command architecture while still requiring precise motor feedback and stable axis control.

The enclosure has an IP20 rating, so it offers finger-safe openings and requires installation inside a closed panel. Installation is permitted up to 1000 m above sea level, and storage temperatures can range from -30 to +85 °C when the unit is not in operation. The controller belongs to Line 03, carries Function ID 01, and is shipped as Version 1. The closed-panel requirement helps protect the controller from direct contact and typical cabinet contamination during operation. The storage range also supports transport and warehouse handling before the drive is placed into service.