DDS02.2-W200-BT29-01-FW Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911321243
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
4 Minutes
24 Seconds
The Bosch Rexroth Indramat DDS02.2-W200-BT29-01-FW is a Digital AC Servo Drive Controller in the DDS Drive Controllers series. It features a rated current of 200 Amps and uses an internal air cooling method within the control cabinet. The device operates within a temperature range of 0 to 45 degrees Celsius and is equipped with digital servo and resolver feedback. Its protection category is rated at IP20.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The DDS02.2-W200-BT29-01-FW is a digital AC servo drive controller manufactured by Bosch Rexroth Indramat for the DDS Drive Controllers series. It converts incoming DC bus energy into controlled three-phase outputs so that synchronous or induction motors follow velocity and position commands from higher-level motion controllers in automated machinery. In operation, it serves as the power stage between the shared DC bus and the motor, regulating current so commanded motion profiles can be followed accurately. The unit belongs to Line 02, is Version 2, and carries Function ID 01.
It delivers up to 200 A of rated output current, allowing it to run large axes without an external step-up device. Thermal dissipation is handled by internal air cooling, so cabinet air passes through the heat sink and no rear exhaust duct is required. The housing has an IP20 rating, which limits accidental contact with live parts and requires installation inside a closed panel. Position data can be processed from digital servo feedback or resolver feedback, allowing the controller to pair with a broad range of Bosch Rexroth motors. Using either feedback format, the drive can close the position loop locally, which reduces external signal handling and supports responsive axis control. This flexibility allows the controller to work with motors that use different feedback devices without changing the basic drive arrangement.
The controller operates reliably between 0–45 °C ambient temperature and can be stored between -30 to +85 °C when it is not powered. Installation is permissible up to 1000 m above sea level before derating is required. The operating range indicates the ambient window for normal use inside a closed cabinet, while the storage range supports handling and warehouse conditions. Above the stated altitude, reduced air density lowers cooling performance and may require a lower load. These limits should be considered when selecting enclosure ventilation, storage conditions, and installation height for the drive.
Frequently Asked Questions about DDS02.2-W200-BT29-01-FW:
Q: What cooling method does the DDS02.2-W200-BT29-01-FW drive controller use?
A: The DDS02.2-W200-BT29-01-FW is cooled using air drawn from inside the control cabinet.
Q: What types of motor feedback are compatible with the DDS02.2-W200-BT29-01-FW?
A: This drive controller supports both digital servo feedback and resolver feedback from the motor.
Q: What is the allowable operating temperature range for the DDS02.2-W200-BT29-01-FW?
A: The DDS02.2-W200-BT29-01-FW operates in environments between 0 and 45ºC.
Q: What is the rated current capacity of the DDS02.2-W200-BT29-01-FW?
A: This model has a rated current of 200A, suitable for high power applications.
Q: What is the maximum installation elevation for the DDS02.2-W200-BT29-01-FW?
A: The maximum recommended installation elevation for this controller is 1000 meters above sea level.
